HS-815BB Mega Sail Control Servo View larger

Hitec HS-815BB Mega Sail Control Servo

RCHI-001

New

Extremely powerful sail winch servo, with dual ball bearings and
Hitec S type connector.
Connector is compatible with all modern receivers and wiring accessories

SPECS: Indirect drive motor
Water tight case
Transit time .46 seconds/140°
Torque kg./cm. (4.8V/6.0V): 19.8 / 24.7

More details

This product is no longer in stock

53,00 €

More info

Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8-6.0 Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.48sec/140° at no load
Operating Speed (6.0V): 0.38sec/140° at no load
Stall Torque (4.8V): 274.96 oz/in. (19.8kg.cm)
Stall Torque (6.0V): 343.01 oz/in. (24.7kg.cm)
Operating Angle: 70 Deg. one side pulse traveling 400usec
Continuous Rotation ModifiableYes
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Current Drain (4.8V): 8mA/idle and 700mA no load operating
Current Drain (6.0V): 8.7mA/idle and 830mA no load operating
Dead Band Width: 8usec
Motor Type: 3 Pole Ferrite
Potentiometer Drive: Indirect Drive
Bearing Type: Dual Ball Bearing
Gear Type: All Heavy Duty Nylon Gears
Connector Wire Length: 11.81" (300mm)
Dimensions: 2.59" x 1.18"x 1.26" (66 x 30 x 57.6mm)
Weight: 5.6 oz. (152g)

Отзывы

На данный момент комментариев нет.

Написать отзыв

 Hitec  HS-815BB Mega Sail Control Servo

Hitec HS-815BB Mega Sail Control Servo

Extremely powerful sail winch servo, with dual ball bearings and
Hitec S type connector.
Connector is compatible with all modern receivers and wiring accessories

SPECS: Indirect drive motor
Water tight case
Transit time .46 seconds/140°
Torque kg./cm. (4.8V/6.0V): 19.8 / 24.7

Написать отзыв